The IM19 is used in conjunction with the UM980 GNSS receiver to provide tilt-compensated Lat/Lon/Alt readings with 1cm accuracy up to 30° tilt angle, and 2cm accuracy up to 60°. Various bits of the ...

Need a Hall sensor? A strip of copper, a strong magnet, and an LM358 are all you need to explore the Hall effect hands-on. This experimental setup turns microvolt signals into measurable millivolt ...

Designed by Nova Radio Labs in the US, the Novaduino Environmental Sensor Kit is an Arduino-programmable air quality and weather monitoring solution built around the company’s own Novaduino Display ...

This is a library for the Arduino IDE that helps interface with ST's VL53L4CD time-of-flight distance sensor. The library makes it simple to configure the sensor and read range data from it via I²C.

Apple removed blood oxygen monitoring from the Apple Watch in early 2024. Somebody has to blink for it to return, and it looks like neither Masimo nor Apple are going to budge. Blood oxygen monitoring ...

(TNS) — The state of Connecticut is testing new vehicle technology designed to eliminate impaired driving. The Driver Alcohol Detection System for Safety vehicle measures carbon dioxide and ethanol ...

I recently had to build an infrared close proximity sensor that could tell if something was dropped in a parcel delivery drop box. After some searching, I ended up using a microcontroller and a piece ...

Air bubble sensors are used to detect air or gas bubbles in flexible clear plastic tubes. They are intended to prevent air infusions. The air bubble sensor has no contact with the liquid and is ...